■ 燃?xì)獍l(fā)電機組選型說明
■ The Introduction of the Gas Gensets Model Selection.
 

• 選擇燃料氣源，分析氣源成份及確認氣源物理狀態參數
• Choose the gas source,analyze the composition  and confirm the physical state parameters of gas soures.
• 燃?xì)庵饕煞荩篊ombustible gas composition:

成份名稱 Composition name	CH4	C2H6	C3H8	C4H10	C5H12	CO	H2	CO2	N2
所占比例 Proportion

  

• 燃?xì)馑s質的成份：Impurities composition:

成份名稱 Composition name	H2S	SO2	H2O mg/m³	焦油Tar mg/m³	固體顆粒 Solid Particles  mg/ m³	其他顆粒 Others  mg/ m³
所占比例 Proportion

 

• 物理?xiàng)l件及氣源氣量：Physical conditions and gas source amount:

項目名稱 Item name	燃?xì)鈮毫?kpa Gas pressure kpa	燃?xì)鉁囟?gas Tempreture ℃	環境溫度 ℃ Ambient temoreture ℃	海拔高度 Sea level height M	燃?xì)鈿庠礆饬?br /> Gas source amount m³/h
項目數值 Item value

 

• 您所需燃?xì)獍l(fā)電機組的參數：Gas Genset Parameter:

機組功率 Genset Power kw	發電機功率Generator capadity kw	相數 Phase	電壓 V Voltage V	頻率 Hz Frequency hz	發動機轉速 rpm Engine speed rpm

 

• 根據燃?xì)獾蜔嶂导叭細鈿饬?，估算機組功率或根據燃?xì)獾蜔嶂导八韫β使浪闳細夂臍饬?/li>
• According to the calorific value of gas and amount,we can estimate the power of the gensets and the consumption.

 

• 各種氣源耗氣量簡單粗略估算數據
• Estimated date of gas consumption for different gas source.

為便于用戶在選型之初的粗略估算，現將每發1度電（即1KWH）各種氣源的耗氣量整理如下：
In order to help the users estimate the date easily before model selection,we list the gas consumption for 1 kwh as follows:
●天燃?xì)猓–H4 98%,C3H8 0.3%,C4H10 0.3%,C5H12 0.4%）Natural Gas               0.32立方米/1度電m³/1 kwh
●液化石油氣（C3H8 100%）LPG                                            0.13立方米/1度電m³/1 kwh
●養豬場（CH4 62%）沼氣Pig Farm Biogas                                     0.5立方米/1度電m³/1 kwh
●生物質秸稈氣化（CH4 2%,CO 20%,H29%）燃?xì)釨iomass Gasifier Gas             2.5立方米/1度電m³/1 kwh
高爐煤氣（CO 6.6%）燃?xì)釨last Furnace Gas                                   2.81立方米/1度電m³/1 kwh
●石油伴生氣（CH4 80%,C2H6 7.4%,C3H8 3.8%,C4H10 2.3%, C5H12 2.4%）           0.27立方米/1度電m³/1 kwh
      Oil Field Associated Gas